The PureShower Filter is designed to address a whole host of toxic chemicals that are of particular concern in a shower setting, and those are the chemicals which evaporate with the water vapor into the air around you.  These include but are not limited to: Chlorine, VOCs (Benzene, Toluene, etc.), Certain Drug Residues, Disinfection byproducts (Chloroform, THMs, etc.) and others.  This shower filter has 4 phases through which the water passes through helping it greatly reduce or eliminate such concerns.

4 Phases of Filtration:

 PHASE 1
Primary Sediment

Sediment Filter at the input of the system catches sediment/silt particles, helping extend the life of rest of the filter media without sacrificing flow rate.

PHASE 2
De-chlorination

Patented KDF55 media de-chlorinates your water by converting the toxic chlorine to it's natural and benign form: Chlor-ide.  Since this media contains natural Zinc in it's formulation, the Zinc in the cartridge also serves to to help prevent fouling/stagnation issues within the cartridge.

PHASE 3
Chemicals

Advanced Catalytic Activated Carbon.  This is an superior form of activated carbon that not only absorbs chemicals into it's micro pore structure (as regular carbons do), but also catalyzes or breaks them down on contact.  This stage is designed for further redundancy for elimination of Chlorine, Hydrogen Sulfide Gas (Cause of Rotten Egg Smell), Radon Gas, Drug Residues and VOCs.  Regular activated carbon commonly used in many shower filters is less effective than our Catalytic Carbon for reduction of Complex Chemicals.

PHASE 4
Secondary Sediment

Secondary Sediment Filter at the output of the system catches additional sediment/silt particles, and helps prevent the advanced carbons and KDF 55 from escaping from the cartridge.

Optimal Cartridge Change Recommendation:

Please note: We recommend to replace our PureShower^TM Filter Cartridge more often than most other shower filter brands, this is because instead of basing the cartridge life on one of the easiest to remove chemicals, Chlorine (which is how most filter companies calculate the rated cartridge life), we also factor in other chemicals/contaminants in the water resulting in a much safer and more redundant approach.

Every 4 Months = 1 Person

Every 3 Months = 2 People

Every 2 Months = 3 People

Every 1 Month   = 4-5 People

__________________________________________________________

Installation Instructions: Click here

Apx. Unit Dimensions: 7" (Height) x 6" (Width) - Weight: 5lbs

Filtered Water Flow: Apx. 2.0 - 2.5 Gallons/min

Max Water Temp: 125F

Max Water Pressure: 80PSI

Warranty: 2 Years

__________________________________________________________

*Individual results may vary.  **Our filter systems are designed to be used only with water that is approved for drinking by the local, state and/or federal regulations.